ProConvert 3.0 Readme
Welcome to ProConvert for Windows!
This file includes important, updated information for users of ProConvert.
The information is more current, in some cases, than that provided in the User
Manual or online help file. Please read this information carefully.
Installation Notes
IMPORTANT!
If you are upgrading from an earlier version of ProConvert, we recommend
removing it before installing this release.
Demo Version
The demo version of ProConvert will read any supported analyzer trace file
and convert the first 25 frames. The purchased version removes this restriction.
Uninstallation Notes
To remove ProConvert, open the "Add/Remove Programs" control panel, select
"WildPackets ProConvert 3.0" and click the "Change/Remove" button. All files
created during the installation will be removed; however, you may need to
manually delete the ProConvert folder to remove files created after
installation.
User Manual
Please read the ProConvert User Manual for an overview of the features of
ProConvert. This can be found in the WildPackets\ProConvert\ installation
directory.
ProConvert 3.0 Now Supports Wan Conversion!
ProConvert supports two-way conversion of traces from PPP, Frame Relay, ISDN,
HDLC (Cisco), and X25 over T1/E1 to and from the following WAN analyzers:
- WANPeek NX (.wpc format)
- Acterna/WWG Domino (except ISDN)
- Agilent Network Analyzer
- HP/Agilent Advisor
- Sniffer DOS (or any analyzer that can save to .syc)
- SnifferPro
ProConvert 3.0 New Analyzer Formats Supported
- WildPackets .wpc WANPeek NX format
- WildPackets .pkt new format (read-only; conversion is to "classic" .pkt
format)
- WildPackets .apc new format (read-only; conversion is to "classic" .apc
format)
- WildPackets .wpz (compressed) traces (read-only)
ProConvert 3.0 Bug Fixes
- Improved integrity when reading certain files from SnifferPro and
Ethereal.
- Improved recognition of SnifferPro time zone variants when converting to
other formats.
- Conversion from NetMon 2.0 to 1.2 is now supported.
Technical Tips and Additional Product Information
- Recommended system requirements
The recommended operating systems for ProConvert are Windows 2000 and XP.
- Conversion from wireless to Ethernet
802.11 can have smaller and larger frames than 802.3. To avoid decode
problems, ProConvert slices 802.11 frames down to 1518 bytes and sets the LLC
length to 1500 bytes. Frames less than 64 bytes are padded with zeros to 64
bytes, so that they don't show up in Ethernet as runt packets.
- Support for Ethereal traces
Since Ethereal supports the libpcap format, save your Ethereal trace files
with a *.dmp file extension and you will be able to use ProConvert to convert
to EtherPeek or other supported analyzer formats.
- Packet Trace Timestamps
ProConvert makes a best effort to convert each packet's timestamp correctly.
However, given the closed-source, proprietary nature of many vendors'
timestamps, WildPackets cannot guarantee exact packet timestamp conversion.
WildPackets, Inc.
1340 Treat Blvd., Suite 500
Walnut Creek, CA 94597
(925) 937-3200
http://www.wildpackets.com/support/contact
Copyright © 1996-2004 WildPackets, Inc.
All rights reserved.